From 7bd1089818f2c6d20d22f7e18b203233fd91e45f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E6=BD=98=E5=95=9F=E5=8D=8E?= <1029559041@qq.com> Date: Fri, 6 Sep 2019 22:52:49 +0800 Subject: [PATCH] =?UTF-8?q?docker=E6=89=93=E5=8C=85?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Dockerfile | 5 + PixivSearch/pixiv/pixiv.py | 2 +- PixivSearch/templates/pixiv/index.html | 2 +- config | 2270 ++++++++++++++++++++++++ sources.list | 8 + 5 files changed, 2285 insertions(+), 2 deletions(-) create mode 100644 config create mode 100644 sources.list diff --git a/Dockerfile b/Dockerfile index f3a7c7c..c6d1403 100644 --- a/Dockerfile +++ b/Dockerfile @@ -5,4 +5,9 @@ COPY . /usr/src/app/ RUN pip install --upgrade pip RUN pip install -r /usr/src/app/requirements.txt WORKDIR /usr/src/app/ +COPY sources.list /etc/apt/ +COPY config /etc/privoxy/ +RUN apt-get update \ +&& apt-get install privoxy \ +&& /etc/init.d/privoxy start CMD ["sh", "./run.sh"] diff --git a/PixivSearch/pixiv/pixiv.py b/PixivSearch/pixiv/pixiv.py index 01e3c56..6337b61 100644 --- a/PixivSearch/pixiv/pixiv.py +++ b/PixivSearch/pixiv/pixiv.py @@ -24,7 +24,7 @@ headers = { lock = threading.Lock() # 多线程全局资源锁 total = 1 -address = '127.0.0.1:8118' +address = '192.168.0.21:8118' # proxies = {"http": "socks5://{0}".format(address), "https": "socks5://{0}".format(address)} proxies = {"http": "http://{0}".format(address), "https": "https://{0}".format(address)} diff --git a/PixivSearch/templates/pixiv/index.html b/PixivSearch/templates/pixiv/index.html index d56ef1d..1e55d8f 100644 --- a/PixivSearch/templates/pixiv/index.html +++ b/PixivSearch/templates/pixiv/index.html @@ -66,7 +66,7 @@ {% if download %} - 图包提取(文件大小:{{ size }}) + 图包提取(文件大小:{{ size }}) {% endif %} diff --git a/config b/config new file mode 100644 index 0000000..6655f03 --- /dev/null +++ b/config @@ -0,0 +1,2270 @@ +# Sample Configuration File for Privoxy 3.0.26 +# +# $Id: config,v 1.112 2016/08/26 13:14:18 fabiankeil Exp $ +# +# Copyright (C) 2001-2016 Privoxy Developers https://www.privoxy.org/ +# +##################################################################### +# # +# Table of Contents # +# # +# I. INTRODUCTION # +# II. FORMAT OF THE CONFIGURATION FILE # +# # +# 1. LOCAL SET-UP DOCUMENTATION # +# 2. CONFIGURATION AND LOG FILE LOCATIONS # +# 3. DEBUGGING # +# 4. ACCESS CONTROL AND SECURITY # +# 5. FORWARDING # +# 6. MISCELLANEOUS # +# 7. WINDOWS GUI OPTIONS # +# # +##################################################################### +# +# +# I. INTRODUCTION +# =============== +# +# This file holds Privoxy's main configuration. Privoxy detects +# configuration changes automatically, so you don't have to restart +# it unless you want to load a different configuration file. +# +# The configuration will be reloaded with the first request after +# the change was done, this request itself will still use the old +# configuration, though. In other words: it takes two requests +# before you see the result of your changes. Requests that are +# dropped due to ACL don't trigger reloads. +# +# When starting Privoxy on Unix systems, give the location of this +# file as last argument. On Windows systems, Privoxy will look for +# this file with the name 'config.txt' in the current working +# directory of the Privoxy process. +# +# +# II. FORMAT OF THE CONFIGURATION FILE +# ==================================== +# +# Configuration lines consist of an initial keyword followed by a +# list of values, all separated by whitespace (any number of spaces +# or tabs). For example, +# +# actionsfile default.action +# +# Indicates that the actionsfile is named 'default.action'. +# +# The '#' indicates a comment. Any part of a line following a '#' is +# ignored, except if the '#' is preceded by a '\'. +# +# Thus, by placing a # at the start of an existing configuration +# line, you can make it a comment and it will be treated as if it +# weren't there. This is called "commenting out" an option and can +# be useful. Removing the # again is called "uncommenting". +# +# Note that commenting out an option and leaving it at its default +# are two completely different things! Most options behave very +# differently when unset. See the "Effect if unset" explanation in +# each option's description for details. +# +# Long lines can be continued on the next line by using a `\' as the +# last character. +# +# +# 1. LOCAL SET-UP DOCUMENTATION +# ============================== +# +# If you intend to operate Privoxy for more users than just +# yourself, it might be a good idea to let them know how to reach +# you, what you block and why you do that, your policies, etc. +# +# +# 1.1. user-manual +# ================= +# +# Specifies: +# +# Location of the Privoxy User Manual. +# +# Type of value: +# +# A fully qualified URI +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# https://www.privoxy.org/version/user-manual/ will be used, +# where version is the Privoxy version. +# +# Notes: +# +# The User Manual URI is the single best source of information +# on Privoxy, and is used for help links from some of the +# internal CGI pages. The manual itself is normally packaged +# with the binary distributions, so you probably want to set +# this to a locally installed copy. +# +# Examples: +# +# The best all purpose solution is simply to put the full local +# PATH to where the User Manual is located: +# +# user-manual /usr/share/doc/privoxy/user-manual +# +# The User Manual is then available to anyone with access to +# Privoxy, by following the built-in URL: http:// +# config.privoxy.org/user-manual/ (or the shortcut: http://p.p/ +# user-manual/). +# +# If the documentation is not on the local system, it can be +# accessed from a remote server, as: +# +# user-manual http://example.com/privoxy/user-manual/ +# +# WARNING!!! +# +# If set, this option should be the first option in the +# config file, because it is used while the config file is +# being read. +# +#user-manual https://www.privoxy.org/user-manual/ +# +# 1.2. trust-info-url +# ==================== +# +# Specifies: +# +# A URL to be displayed in the error page that users will see if +# access to an untrusted page is denied. +# +# Type of value: +# +# URL +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# No links are displayed on the "untrusted" error page. +# +# Notes: +# +# The value of this option only matters if the experimental +# trust mechanism has been activated. (See trustfile below.) +# +# If you use the trust mechanism, it is a good idea to write up +# some on-line documentation about your trust policy and to +# specify the URL(s) here. Use multiple times for multiple URLs. +# +# The URL(s) should be added to the trustfile as well, so users +# don't end up locked out from the information on why they were +# locked out in the first place! +# +#trust-info-url http://www.example.com/why_we_block.html +#trust-info-url http://www.example.com/what_we_allow.html +# +# 1.3. admin-address +# =================== +# +# Specifies: +# +# An email address to reach the Privoxy administrator. +# +# Type of value: +# +# Email address +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# No email address is displayed on error pages and the CGI user +# interface. +# +# Notes: +# +# If both admin-address and proxy-info-url are unset, the whole +# "Local Privoxy Support" box on all generated pages will not be +# shown. +# +#admin-address privoxy-admin@example.com +# +# 1.4. proxy-info-url +# ==================== +# +# Specifies: +# +# A URL to documentation about the local Privoxy setup, +# configuration or policies. +# +# Type of value: +# +# URL +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# No link to local documentation is displayed on error pages and +# the CGI user interface. +# +# Notes: +# +# If both admin-address and proxy-info-url are unset, the whole +# "Local Privoxy Support" box on all generated pages will not be +# shown. +# +# This URL shouldn't be blocked ;-) +# +#proxy-info-url http://www.example.com/proxy-service.html +# +# 2. CONFIGURATION AND LOG FILE LOCATIONS +# ======================================== +# +# Privoxy can (and normally does) use a number of other files for +# additional configuration, help and logging. This section of the +# configuration file tells Privoxy where to find those other files. +# +# The user running Privoxy, must have read permission for all +# configuration files, and write permission to any files that would +# be modified, such as log files and actions files. +# +# +# 2.1. confdir +# ============= +# +# Specifies: +# +# The directory where the other configuration files are located. +# +# Type of value: +# +# Path name +# +# Default value: +# +# /etc/privoxy (Unix) or Privoxy installation dir (Windows) +# +# Effect if unset: +# +# Mandatory +# +# Notes: +# +# No trailing "/", please. +# +confdir /etc/privoxy +# +# 2.2. templdir +# ============== +# +# Specifies: +# +# An alternative directory where the templates are loaded from. +# +# Type of value: +# +# Path name +# +# Default value: +# +# unset +# +# Effect if unset: +# +# The templates are assumed to be located in confdir/template. +# +# Notes: +# +# Privoxy's original templates are usually overwritten with each +# update. Use this option to relocate customized templates that +# should be kept. As template variables might change between +# updates, you shouldn't expect templates to work with Privoxy +# releases other than the one they were part of, though. +# +#templdir . +# +# 2.3. temporary-directory +# ========================= +# +# Specifies: +# +# A directory where Privoxy can create temporary files. +# +# Type of value: +# +# Path name +# +# Default value: +# +# unset +# +# Effect if unset: +# +# No temporary files are created, external filters don't work. +# +# Notes: +# +# To execute external filters, Privoxy has to create temporary +# files. This directive specifies the directory the temporary +# files should be written to. +# +# It should be a directory only Privoxy (and trusted users) can +# access. +# +#temporary-directory . +# +# 2.4. logdir +# ============ +# +# Specifies: +# +# The directory where all logging takes place (i.e. where the +# logfile is located). +# +# Type of value: +# +# Path name +# +# Default value: +# +# /var/log/privoxy (Unix) or Privoxy installation dir (Windows) +# +# Effect if unset: +# +# Mandatory +# +# Notes: +# +# No trailing "/", please. +# +logdir /var/log/privoxy +# +# 2.5. actionsfile +# ================= +# +# Specifies: +# +# The actions file(s) to use +# +# Type of value: +# +# Complete file name, relative to confdir +# +# Default values: +# +# match-all.action # Actions that are applied to all sites and maybe overruled later on. +# +# default.action # Main actions file +# +# user.action # User customizations +# +# Effect if unset: +# +# No actions are taken at all. More or less neutral proxying. +# +# Notes: +# +# Multiple actionsfile lines are permitted, and are in fact +# recommended! +# +# The default values are default.action, which is the "main" +# actions file maintained by the developers, and user.action, +# where you can make your personal additions. +# +# Actions files contain all the per site and per URL +# configuration for ad blocking, cookie management, privacy +# considerations, etc. +# +actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on. +actionsfile default.action # Main actions file +actionsfile user.action # User customizations +# +# 2.6. filterfile +# ================ +# +# Specifies: +# +# The filter file(s) to use +# +# Type of value: +# +# File name, relative to confdir +# +# Default value: +# +# default.filter (Unix) or default.filter.txt (Windows) +# +# Effect if unset: +# +# No textual content filtering takes place, i.e. all +filter{name} +# actions in the actions files are turned neutral. +# +# Notes: +# +# Multiple filterfile lines are permitted. +# +# The filter files contain content modification rules that use +# regular expressions. These rules permit powerful changes on +# the content of Web pages, and optionally the headers as well, +# e.g., you could try to disable your favorite JavaScript +# annoyances, re-write the actual displayed text, or just have +# some fun playing buzzword bingo with web pages. +# +# The +filter{name} actions rely on the relevant filter (name) +# to be defined in a filter file! +# +# A pre-defined filter file called default.filter that contains +# a number of useful filters for common problems is included in +# the distribution. See the section on the filter action for a +# list. +# +# It is recommended to place any locally adapted filters into a +# separate file, such as user.filter. +# +filterfile default.filter +filterfile user.filter # User customizations +# +# 2.7. logfile +# ============= +# +# Specifies: +# +# The log file to use +# +# Type of value: +# +# File name, relative to logdir +# +# Default value: +# +# Unset (commented out). When activated: logfile (Unix) or +# privoxy.log (Windows). +# +# Effect if unset: +# +# No logfile is written. +# +# Notes: +# +# The logfile is where all logging and error messages are +# written. The level of detail and number of messages are set +# with the debug option (see below). The logfile can be useful +# for tracking down a problem with Privoxy (e.g., it's not +# blocking an ad you think it should block) and it can help you +# to monitor what your browser is doing. +# +# Depending on the debug options below, the logfile may be a +# privacy risk if third parties can get access to it. As most +# users will never look at it, Privoxy only logs fatal errors by +# default. +# +# For most troubleshooting purposes, you will have to change +# that, please refer to the debugging section for details. +# +# Any log files must be writable by whatever user Privoxy is +# being run as (on Unix, default user id is "privoxy"). +# +# To prevent the logfile from growing indefinitely, it is +# recommended to periodically rotate or shorten it. Many +# operating systems support log rotation out of the box, some +# require additional software to do it. For details, please +# refer to the documentation for your operating system. +# +logfile logfile +# +# 2.8. trustfile +# =============== +# +# Specifies: +# +# The name of the trust file to use +# +# Type of value: +# +# File name, relative to confdir +# +# Default value: +# +# Unset (commented out). When activated: trust (Unix) or +# trust.txt (Windows) +# +# Effect if unset: +# +# The entire trust mechanism is disabled. +# +# Notes: +# +# The trust mechanism is an experimental feature for building +# white-lists and should be used with care. It is NOT +# recommended for the casual user. +# +# If you specify a trust file, Privoxy will only allow access to +# sites that are specified in the trustfile. Sites can be listed +# in one of two ways: +# +# Prepending a ~ character limits access to this site only (and +# any sub-paths within this site), e.g. ~www.example.com allows +# access to ~www.example.com/features/news.html, etc. +# +# Or, you can designate sites as trusted referrers, by +# prepending the name with a + character. The effect is that +# access to untrusted sites will be granted -- but only if a +# link from this trusted referrer was used to get there. The +# link target will then be added to the "trustfile" so that +# future, direct accesses will be granted. Sites added via this +# mechanism do not become trusted referrers themselves (i.e. +# they are added with a ~ designation). There is a limit of 512 +# such entries, after which new entries will not be made. +# +# If you use the + operator in the trust file, it may grow +# considerably over time. +# +# It is recommended that Privoxy be compiled with the +# --disable-force, --disable-toggle and --disable-editor +# options, if this feature is to be used. +# +# Possible applications include limiting Internet access for +# children. +# +#trustfile trust +# +# 3. DEBUGGING +# ============= +# +# These options are mainly useful when tracing a problem. Note that +# you might also want to invoke Privoxy with the --no-daemon command +# line option when debugging. +# +# +# 3.1. debug +# =========== +# +# Specifies: +# +# Key values that determine what information gets logged. +# +# Type of value: +# +# Integer values +# +# Default value: +# +# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are +# logged) +# +# Effect if unset: +# +# Default value is used (see above). +# +# Notes: +# +# The available debug levels are: +# +# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024. +# debug 2 # show each connection status +# debug 4 # show I/O status +# debug 8 # show header parsing +# debug 16 # log all data written to the network +# debug 32 # debug force feature +# debug 64 # debug regular expression filters +# debug 128 # debug redirects +# debug 256 # debug GIF de-animation +# debug 512 # Common Log Format +# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. +# debug 2048 # CGI user interface +# debug 4096 # Startup banner and warnings. +# debug 8192 # Non-fatal errors +# debug 32768 # log all data read from the network +# debug 65536 # Log the applying actions +# +# To select multiple debug levels, you can either add them or +# use multiple debug lines. +# +# A debug level of 1 is informative because it will show you +# each request as it happens. 1, 1024, 4096 and 8192 are +# recommended so that you will notice when things go wrong. The +# other levels are probably only of interest if you are hunting +# down a specific problem. They can produce a hell of an output +# (especially 16). +# +# If you are used to the more verbose settings, simply enable +# the debug lines below again. +# +# If you want to use pure CLF (Common Log Format), you should +# set "debug 512" ONLY and not enable anything else. +# +# Privoxy has a hard-coded limit for the length of log messages. +# If it's reached, messages are logged truncated and marked with +# "... [too long, truncated]". +# +# Please don't file any support requests without trying to +# reproduce the problem with increased debug level first. Once +# you read the log messages, you may even be able to solve the +# problem on your own. +# +#debug 1 # Log the destination for each request Privoxy let through. See also debug 1024. +#debug 1024 # Actions that are applied to all sites and maybe overruled later on. +#debug 4096 # Startup banner and warnings +#debug 8192 # Non-fatal errors +# +# 3.2. single-threaded +# ===================== +# +# Specifies: +# +# Whether to run only one server thread. +# +# Type of value: +# +# 1 or 0 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Multi-threaded (or, where unavailable: forked) operation, i.e. +# the ability to serve multiple requests simultaneously. +# +# Notes: +# +# This option is only there for debugging purposes. It will +# drastically reduce performance. +# +#single-threaded 1 +# +# 3.3. hostname +# ============== +# +# Specifies: +# +# The hostname shown on the CGI pages. +# +# Type of value: +# +# Text +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# The hostname provided by the operating system is used. +# +# Notes: +# +# On some misconfigured systems resolving the hostname fails or +# takes too much time and slows Privoxy down. Setting a fixed +# hostname works around the problem. +# +# In other circumstances it might be desirable to show a +# hostname other than the one returned by the operating system. +# For example if the system has several different hostnames and +# you don't want to use the first one. +# +# Note that Privoxy does not validate the specified hostname +# value. +# +#hostname hostname.example.org +# +# 4. ACCESS CONTROL AND SECURITY +# =============================== +# +# This section of the config file controls the security-relevant +# aspects of Privoxy's configuration. +# +# +# 4.1. listen-address +# ==================== +# +# Specifies: +# +# The address and TCP port on which Privoxy will listen for +# client requests. +# +# Type of value: +# +# [IP-Address]:Port +# +# [Hostname]:Port +# +# Default value: +# +# 127.0.0.1:8118 +# +# Effect if unset: +# +# Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is +# suitable and recommended for home users who run Privoxy on the +# same machine as their browser. +# +# Notes: +# +# You will need to configure your browser(s) to this proxy +# address and port. +# +# If you already have another service running on port 8118, or +# if you want to serve requests from other machines (e.g. on +# your local network) as well, you will need to override the +# default. +# +# You can use this statement multiple times to make Privoxy +# listen on more ports or more IP addresses. Suitable if your +# operating system does not support sharing IPv6 and IPv4 +# protocols on the same socket. +# +# If a hostname is used instead of an IP address, Privoxy will +# try to resolve it to an IP address and if there are multiple, +# use the first one returned. +# +# If the address for the hostname isn't already known on the +# system (for example because it's in /etc/hostname), this may +# result in DNS traffic. +# +# If the specified address isn't available on the system, or if +# the hostname can't be resolved, Privoxy will fail to start. +# +# IPv6 addresses containing colons have to be quoted by +# brackets. They can only be used if Privoxy has been compiled +# with IPv6 support. If you aren't sure if your version supports +# it, have a look at http://config.privoxy.org/show-status. +# +# Some operating systems will prefer IPv6 to IPv4 addresses even +# if the system has no IPv6 connectivity which is usually not +# expected by the user. Some even rely on DNS to resolve +# localhost which mean the "localhost" address used may not +# actually be local. +# +# It is therefore recommended to explicitly configure the +# intended IP address instead of relying on the operating +# system, unless there's a strong reason not to. +# +# If you leave out the address, Privoxy will bind to all IPv4 +# interfaces (addresses) on your machine and may become +# reachable from the Internet and/or the local network. Be aware +# that some GNU/Linux distributions modify that behaviour +# without updating the documentation. Check for non-standard +# patches if your Privoxy version behaves differently. +# +# If you configure Privoxy to be reachable from the network, +# consider using access control lists (ACL's, see below), and/or +# a firewall. +# +# If you open Privoxy to untrusted users, you will also want to +# make sure that the following actions are disabled: +# enable-edit-actions and enable-remote-toggle +# +# Example: +# +# Suppose you are running Privoxy on a machine which has the +# address 192.168.0.1 on your local private network +# (192.168.0.0) and has another outside connection with a +# different address. You want it to serve requests from inside +# only: +# +# listen-address 192.168.0.1:8118 +# +# Suppose you are running Privoxy on an IPv6-capable machine and +# you want it to listen on the IPv6 address of the loopback +# device: +# +# listen-address [::1]:8118 +# +listen-address 192.168.0.21:8118 +# +# 4.2. toggle +# ============ +# +# Specifies: +# +# Initial state of "toggle" status +# +# Type of value: +# +# 1 or 0 +# +# Default value: +# +# 1 +# +# Effect if unset: +# +# Act as if toggled on +# +# Notes: +# +# If set to 0, Privoxy will start in "toggled off" mode, i.e. +# mostly behave like a normal, content-neutral proxy with both +# ad blocking and content filtering disabled. See +# enable-remote-toggle below. +# +toggle 1 +# +# 4.3. enable-remote-toggle +# ========================== +# +# Specifies: +# +# Whether or not the web-based toggle feature may be used +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# The web-based toggle feature is disabled. +# +# Notes: +# +# When toggled off, Privoxy mostly acts like a normal, +# content-neutral proxy, i.e. doesn't block ads or filter +# content. +# +# Access to the toggle feature can not be controlled separately +# by "ACLs" or HTTP authentication, so that everybody who can +# access Privoxy (see "ACLs" and listen-address above) can +# toggle it for all users. So this option is not recommended for +# multi-user environments with untrusted users. +# +# Note that malicious client side code (e.g Java) is also +# capable of using this option. +# +# As a lot of Privoxy users don't read documentation, this +# feature is disabled by default. +# +# Note that you must have compiled Privoxy with support for this +# feature, otherwise this option has no effect. +# +enable-remote-toggle 0 +# +# 4.4. enable-remote-http-toggle +# =============================== +# +# Specifies: +# +# Whether or not Privoxy recognizes special HTTP headers to +# change its behaviour. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Privoxy ignores special HTTP headers. +# +# Notes: +# +# When toggled on, the client can change Privoxy's behaviour by +# setting special HTTP headers. Currently the only supported +# special header is "X-Filter: No", to disable filtering for the +# ongoing request, even if it is enabled in one of the action +# files. +# +# This feature is disabled by default. If you are using Privoxy +# in a environment with trusted clients, you may enable this +# feature at your discretion. Note that malicious client side +# code (e.g Java) is also capable of using this feature. +# +# This option will be removed in future releases as it has been +# obsoleted by the more general header taggers. +# +enable-remote-http-toggle 0 +# +# 4.5. enable-edit-actions +# ========================= +# +# Specifies: +# +# Whether or not the web-based actions file editor may be used +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# The web-based actions file editor is disabled. +# +# Notes: +# +# Access to the editor can not be controlled separately by +# "ACLs" or HTTP authentication, so that everybody who can +# access Privoxy (see "ACLs" and listen-address above) can +# modify its configuration for all users. +# +# This option is not recommended for environments with untrusted +# users and as a lot of Privoxy users don't read documentation, +# this feature is disabled by default. +# +# Note that malicious client side code (e.g Java) is also +# capable of using the actions editor and you shouldn't enable +# this options unless you understand the consequences and are +# sure your browser is configured correctly. +# +# Note that you must have compiled Privoxy with support for this +# feature, otherwise this option has no effect. +# +enable-edit-actions 0 +# +# 4.6. enforce-blocks +# ==================== +# +# Specifies: +# +# Whether the user is allowed to ignore blocks and can "go there +# anyway". +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Blocks are not enforced. +# +# Notes: +# +# Privoxy is mainly used to block and filter requests as a +# service to the user, for example to block ads and other junk +# that clogs the pipes. Privoxy's configuration isn't perfect +# and sometimes innocent pages are blocked. In this situation it +# makes sense to allow the user to enforce the request and have +# Privoxy ignore the block. +# +# In the default configuration Privoxy's "Blocked" page contains +# a "go there anyway" link to adds a special string (the force +# prefix) to the request URL. If that link is used, Privoxy will +# detect the force prefix, remove it again and let the request +# pass. +# +# Of course Privoxy can also be used to enforce a network +# policy. In that case the user obviously should not be able to +# bypass any blocks, and that's what the "enforce-blocks" option +# is for. If it's enabled, Privoxy hides the "go there anyway" +# link. If the user adds the force prefix by hand, it will not +# be accepted and the circumvention attempt is logged. +# +# Examples: +# +# enforce-blocks 1 +# +enforce-blocks 0 +# +# 4.7. ACLs: permit-access and deny-access +# ========================================= +# +# Specifies: +# +# Who can access what. +# +# Type of value: +# +# src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]] +# +# Where src_addr and dst_addr are IPv4 addresses in dotted +# decimal notation or valid DNS names, port is a port number, +# and src_masklen and dst_masklen are subnet masks in CIDR +# notation, i.e. integer values from 2 to 30 representing the +# length (in bits) of the network address. The masks and the +# whole destination part are optional. +# +# If your system implements RFC 3493, then src_addr and dst_addr +# can be IPv6 addresses delimeted by brackets, port can be a +# number or a service name, and src_masklen and dst_masklen can +# be a number from 0 to 128. +# +# Default value: +# +# Unset +# +# If no port is specified, any port will match. If no +# src_masklen or src_masklen is given, the complete IP address +# has to match (i.e. 32 bits for IPv4 and 128 bits for IPv6). +# +# Effect if unset: +# +# Don't restrict access further than implied by listen-address +# +# Notes: +# +# Access controls are included at the request of ISPs and +# systems administrators, and are not usually needed by +# individual users. For a typical home user, it will normally +# suffice to ensure that Privoxy only listens on the localhost +# (127.0.0.1) or internal (home) network address by means of the +# listen-address option. +# +# Please see the warnings in the FAQ that Privoxy is not +# intended to be a substitute for a firewall or to encourage +# anyone to defer addressing basic security weaknesses. +# +# Multiple ACL lines are OK. If any ACLs are specified, Privoxy +# only talks to IP addresses that match at least one +# permit-access line and don't match any subsequent deny-access +# line. In other words, the last match wins, with the default +# being deny-access. +# +# If Privoxy is using a forwarder (see forward below) for a +# particular destination URL, the dst_addr that is examined is +# the address of the forwarder and NOT the address of the +# ultimate target. This is necessary because it may be +# impossible for the local Privoxy to determine the IP address +# of the ultimate target (that's often what gateways are used +# for). +# +# You should prefer using IP addresses over DNS names, because +# the address lookups take time. All DNS names must resolve! You +# can not use domain patterns like "*.org" or partial domain +# names. If a DNS name resolves to multiple IP addresses, only +# the first one is used. +# +# Some systems allow IPv4 clients to connect to IPv6 server +# sockets. Then the client's IPv4 address will be translated by +# the system into IPv6 address space with special prefix +# ::ffff:0:0/96 (so called IPv4 mapped IPv6 address). Privoxy +# can handle it and maps such ACL addresses automatically. +# +# Denying access to particular sites by ACL may have undesired +# side effects if the site in question is hosted on a machine +# which also hosts other sites (most sites are). +# +# Examples: +# +# Explicitly define the default behavior if no ACL and +# listen-address are set: "localhost" is OK. The absence of a +# dst_addr implies that all destination addresses are OK: +# +# permit-access localhost +# +# Allow any host on the same class C subnet as www.privoxy.org +# access to nothing but www.example.com (or other domains hosted +# on the same system): +# +# permit-access www.privoxy.org/24 www.example.com/32 +# +# Allow access from any host on the 26-bit subnet 192.168.45.64 +# to anywhere, with the exception that 192.168.45.73 may not +# access the IP address behind www.dirty-stuff.example.com: +# +# permit-access 192.168.45.64/26 +# deny-access 192.168.45.73 www.dirty-stuff.example.com +# +# Allow access from the IPv4 network 192.0.2.0/24 even if +# listening on an IPv6 wild card address (not supported on all +# platforms): +# +# permit-access 192.0.2.0/24 +# +# This is equivalent to the following line even if listening on +# an IPv4 address (not supported on all platforms): +# +# permit-access [::ffff:192.0.2.0]/120 +# +# +# 4.8. buffer-limit +# ================== +# +# Specifies: +# +# Maximum size of the buffer for content filtering. +# +# Type of value: +# +# Size in Kbytes +# +# Default value: +# +# 4096 +# +# Effect if unset: +# +# Use a 4MB (4096 KB) limit. +# +# Notes: +# +# For content filtering, i.e. the +filter and +deanimate-gif +# actions, it is necessary that Privoxy buffers the entire +# document body. This can be potentially dangerous, since a +# server could just keep sending data indefinitely and wait for +# your RAM to exhaust -- with nasty consequences. Hence this +# option. +# +# When a document buffer size reaches the buffer-limit, it is +# flushed to the client unfiltered and no further attempt to +# filter the rest of the document is made. Remember that there +# may be multiple threads running, which might require up to +# buffer-limit Kbytes each, unless you have enabled +# "single-threaded" above. +# +buffer-limit 4096 +# +# 4.9. enable-proxy-authentication-forwarding +# ============================================ +# +# Specifies: +# +# Whether or not proxy authentication through Privoxy should +# work. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Proxy authentication headers are removed. +# +# Notes: +# +# Privoxy itself does not support proxy authentication, but can +# allow clients to authenticate against Privoxy's parent proxy. +# +# By default Privoxy (3.0.21 and later) don't do that and remove +# Proxy-Authorization headers in requests and Proxy-Authenticate +# headers in responses to make it harder for malicious sites to +# trick inexperienced users into providing login information. +# +# If this option is enabled the headers are forwarded. +# +# Enabling this option is not recommended if there is no parent +# proxy that requires authentication or if the local network +# between Privoxy and the parent proxy isn't trustworthy. If +# proxy authentication is only required for some requests, it is +# recommended to use a client header filter to remove the +# authentication headers for requests where they aren't needed. +# +enable-proxy-authentication-forwarding 0 +# +# 5. FORWARDING +# ============== +# +# This feature allows routing of HTTP requests through a chain of +# multiple proxies. +# +# Forwarding can be used to chain Privoxy with a caching proxy to +# speed up browsing. Using a parent proxy may also be necessary if +# the machine that Privoxy runs on has no direct Internet access. +# +# Note that parent proxies can severely decrease your privacy level. +# For example a parent proxy could add your IP address to the +# request headers and if it's a caching proxy it may add the "Etag" +# header to revalidation requests again, even though you configured +# Privoxy to remove it. It may also ignore Privoxy's header time +# randomization and use the original values which could be used by +# the server as cookie replacement to track your steps between +# visits. +# +# Also specified here are SOCKS proxies. Privoxy supports the SOCKS +# 4 and SOCKS 4A protocols. +# +# +# 5.1. forward +# ============= +# +# Specifies: +# +# To which parent HTTP proxy specific requests should be routed. +# +# Type of value: +# +# target_pattern http_parent[:port] +# +# where target_pattern is a URL pattern that specifies to which +# requests (i.e. URLs) this forward rule shall apply. Use / to +# denote "all URLs". http_parent[:port] is the DNS name or IP +# address of the parent HTTP proxy through which the requests +# should be forwarded, optionally followed by its listening port +# (default: 8000). Use a single dot (.) to denote "no +# forwarding". +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Don't use parent HTTP proxies. +# +# Notes: +# +# If http_parent is ".", then requests are not forwarded to +# another HTTP proxy but are made directly to the web servers. +# +# http_parent can be a numerical IPv6 address (if RFC 3493 is +# implemented). To prevent clashes with the port delimiter, the +# whole IP address has to be put into brackets. On the other +# hand a target_pattern containing an IPv6 address has to be put +# into angle brackets (normal brackets are reserved for regular +# expressions already). +# +# Multiple lines are OK, they are checked in sequence, and the +# last match wins. +# +# Examples: +# +# Everything goes to an example parent proxy, except SSL on port +# 443 (which it doesn't handle): +# +# forward / parent-proxy.example.org:8080 +# forward :443 . +# +# Everything goes to our example ISP's caching proxy, except for +# requests to that ISP's sites: +# +# forward / caching-proxy.isp.example.net:8000 +# forward .isp.example.net . +# +# Parent proxy specified by an IPv6 address: +# +# forward / [2001:DB8::1]:8000 +# +# Suppose your parent proxy doesn't support IPv6: +# +# forward / parent-proxy.example.org:8000 +# forward ipv6-server.example.org . +# forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> . +# +# +# 5.2. forward-socks4, forward-socks4a, forward-socks5 and forward-socks5t +# ========================================================================= +# +# Specifies: +# +# Through which SOCKS proxy (and optionally to which parent HTTP +# proxy) specific requests should be routed. +# +# Type of value: +# +# target_pattern socks_proxy[:port] http_parent[:port] +# +# where target_pattern is a URL pattern that specifies to which +# requests (i.e. URLs) this forward rule shall apply. Use / to +# denote "all URLs". http_parent and socks_proxy are IP +# addresses in dotted decimal notation or valid DNS names ( +# http_parent may be "." to denote "no HTTP forwarding"), and +# the optional port parameters are TCP ports, i.e. integer +# values from 1 to 65535 +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Don't use SOCKS proxies. +# +# Notes: +# +# Multiple lines are OK, they are checked in sequence, and the +# last match wins. +# +# The difference between forward-socks4 and forward-socks4a is +# that in the SOCKS 4A protocol, the DNS resolution of the +# target hostname happens on the SOCKS server, while in SOCKS 4 +# it happens locally. +# +# With forward-socks5 the DNS resolution will happen on the +# remote server as well. +# +# forward-socks5t works like vanilla forward-socks5 but lets +# Privoxy additionally use Tor-specific SOCKS extensions. +# Currently the only supported SOCKS extension is optimistic +# data which can reduce the latency for the first request made +# on a newly created connection. +# +# socks_proxy and http_parent can be a numerical IPv6 address +# (if RFC 3493 is implemented). To prevent clashes with the port +# delimiter, the whole IP address has to be put into brackets. +# On the other hand a target_pattern containing an IPv6 address +# has to be put into angle brackets (normal brackets are +# reserved for regular expressions already). +# +# If http_parent is ".", then requests are not forwarded to +# another HTTP proxy but are made (HTTP-wise) directly to the +# web servers, albeit through a SOCKS proxy. +# +# Examples: +# +# From the company example.com, direct connections are made to +# all "internal" domains, but everything outbound goes through +# their ISP's proxy by way of example.com's corporate SOCKS 4A +# gateway to the Internet. +# +# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 +# forward .example.com . +# +# A rule that uses a SOCKS 4 gateway for all destinations but no +# HTTP parent looks like this: +# +# forward-socks4 / socks-gw.example.com:1080 . +# +# To chain Privoxy and Tor, both running on the same system, you +# would use something like: +# + forward-socks5t / 192.168.0.21:1080 . +# +# Note that if you got Tor through one of the bundles, you may +# have to change the port from 9050 to 9150 (or even another +# one). For details, please check the documentation on the Tor +# website. +# +# The public Tor network can't be used to reach your local +# network, if you need to access local servers you therefore +# might want to make some exceptions: +# +# forward 192.168.*.*/ . +# forward 10.*.*.*/ . +# forward 127.*.*.*/ . +# +# Unencrypted connections to systems in these address ranges +# will be as (un)secure as the local network is, but the +# alternative is that you can't reach the local network through +# Privoxy at all. Of course this may actually be desired and +# there is no reason to make these exceptions if you aren't sure +# you need them. +# +# If you also want to be able to reach servers in your local +# network by using their names, you will need additional +# exceptions that look like this: +# +# forward localhost/ . +# +# +# 5.3. forwarded-connect-retries +# =============================== +# +# Specifies: +# +# How often Privoxy retries if a forwarded connection request +# fails. +# +# Type of value: +# +# Number of retries. +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Connections forwarded through other proxies are treated like +# direct connections and no retry attempts are made. +# +# Notes: +# +# forwarded-connect-retries is mainly interesting for socks4a +# connections, where Privoxy can't detect why the connections +# failed. The connection might have failed because of a DNS +# timeout in which case a retry makes sense, but it might also +# have failed because the server doesn't exist or isn't +# reachable. In this case the retry will just delay the +# appearance of Privoxy's error message. +# +# Note that in the context of this option, "forwarded +# connections" includes all connections that Privoxy forwards +# through other proxies. This option is not limited to the HTTP +# CONNECT method. +# +# Only use this option, if you are getting lots of +# forwarding-related error messages that go away when you try +# again manually. Start with a small value and check Privoxy's +# logfile from time to time, to see how many retries are usually +# needed. +# +# Examples: +# +# forwarded-connect-retries 1 +# +forwarded-connect-retries 0 +# +# 6. MISCELLANEOUS +# ================= +# +# 6.1. accept-intercepted-requests +# ================================= +# +# Specifies: +# +# Whether intercepted requests should be treated as valid. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Only proxy requests are accepted, intercepted requests are +# treated as invalid. +# +# Notes: +# +# If you don't trust your clients and want to force them to use +# Privoxy, enable this option and configure your packet filter +# to redirect outgoing HTTP connections into Privoxy. +# +# Note that intercepting encrypted connections (HTTPS) isn't +# supported. +# +# Make sure that Privoxy's own requests aren't redirected as +# well. Additionally take care that Privoxy can't intentionally +# connect to itself, otherwise you could run into redirection +# loops if Privoxy's listening port is reachable by the outside +# or an attacker has access to the pages you visit. +# +# If you are running Privoxy as intercepting proxy without being +# able to intercept all client requests you may want to adjust +# the CGI templates to make sure they don't reference content +# from config.privoxy.org. +# +# Examples: +# +# accept-intercepted-requests 1 +# +accept-intercepted-requests 0 +# +# 6.2. allow-cgi-request-crunching +# ================================= +# +# Specifies: +# +# Whether requests to Privoxy's CGI pages can be blocked or +# redirected. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Privoxy ignores block and redirect actions for its CGI pages. +# +# Notes: +# +# By default Privoxy ignores block or redirect actions for its +# CGI pages. Intercepting these requests can be useful in +# multi-user setups to implement fine-grained access control, +# but it can also render the complete web interface useless and +# make debugging problems painful if done without care. +# +# Don't enable this option unless you're sure that you really +# need it. +# +# Examples: +# +# allow-cgi-request-crunching 1 +# +allow-cgi-request-crunching 0 +# +# 6.3. split-large-forms +# ======================= +# +# Specifies: +# +# Whether the CGI interface should stay compatible with broken +# HTTP clients. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# The CGI form generate long GET URLs. +# +# Notes: +# +# Privoxy's CGI forms can lead to rather long URLs. This isn't a +# problem as far as the HTTP standard is concerned, but it can +# confuse clients with arbitrary URL length limitations. +# +# Enabling split-large-forms causes Privoxy to divide big forms +# into smaller ones to keep the URL length down. It makes +# editing a lot less convenient and you can no longer submit all +# changes at once, but at least it works around this browser +# bug. +# +# If you don't notice any editing problems, there is no reason +# to enable this option, but if one of the submit buttons +# appears to be broken, you should give it a try. +# +# Examples: +# +# split-large-forms 1 +# +split-large-forms 0 +# +# 6.4. keep-alive-timeout +# ======================== +# +# Specifies: +# +# Number of seconds after which an open connection will no +# longer be reused. +# +# Type of value: +# +# Time in seconds. +# +# Default value: +# +# None +# +# Effect if unset: +# +# Connections are not kept alive. +# +# Notes: +# +# This option allows clients to keep the connection to Privoxy +# alive. If the server supports it, Privoxy will keep the +# connection to the server alive as well. Under certain +# circumstances this may result in speed-ups. +# +# By default, Privoxy will close the connection to the server if +# the client connection gets closed, or if the specified timeout +# has been reached without a new request coming in. This +# behaviour can be changed with the connection-sharing option. +# +# This option has no effect if Privoxy has been compiled without +# keep-alive support. +# +# Note that a timeout of five seconds as used in the default +# configuration file significantly decreases the number of +# connections that will be reused. The value is used because +# some browsers limit the number of connections they open to a +# single host and apply the same limit to proxies. This can +# result in a single website "grabbing" all the connections the +# browser allows, which means connections to other websites +# can't be opened until the connections currently in use time +# out. +# +# Several users have reported this as a Privoxy bug, so the +# default value has been reduced. Consider increasing it to 300 +# seconds or even more if you think your browser can handle it. +# If your browser appears to be hanging, it probably can't. +# +# Examples: +# +# keep-alive-timeout 300 +# +keep-alive-timeout 5 +# +# 6.5. tolerate-pipelining +# ========================= +# +# Specifies: +# +# Whether or not pipelined requests should be served. +# +# Type of value: +# +# 0 or 1. +# +# Default value: +# +# None +# +# Effect if unset: +# +# If Privoxy receives more than one request at once, it +# terminates the client connection after serving the first one. +# +# Notes: +# +# Privoxy currently doesn't pipeline outgoing requests, thus +# allowing pipelining on the client connection is not guaranteed +# to improve the performance. +# +# By default Privoxy tries to discourage clients from pipelining +# by discarding aggressively pipelined requests, which forces +# the client to resend them through a new connection. +# +# This option lets Privoxy tolerate pipelining. Whether or not +# that improves performance mainly depends on the client +# configuration. +# +# If you are seeing problems with pages not properly loading, +# disabling this option could work around the problem. +# +# Examples: +# +# tolerate-pipelining 1 +# +tolerate-pipelining 1 +# +# 6.6. default-server-timeout +# ============================ +# +# Specifies: +# +# Assumed server-side keep-alive timeout if not specified by the +# server. +# +# Type of value: +# +# Time in seconds. +# +# Default value: +# +# None +# +# Effect if unset: +# +# Connections for which the server didn't specify the keep-alive +# timeout are not reused. +# +# Notes: +# +# Enabling this option significantly increases the number of +# connections that are reused, provided the keep-alive-timeout +# option is also enabled. +# +# While it also increases the number of connections problems +# when Privoxy tries to reuse a connection that already has been +# closed on the server side, or is closed while Privoxy is +# trying to reuse it, this should only be a problem if it +# happens for the first request sent by the client. If it +# happens for requests on reused client connections, Privoxy +# will simply close the connection and the client is supposed to +# retry the request without bothering the user. +# +# Enabling this option is therefore only recommended if the +# connection-sharing option is disabled. +# +# It is an error to specify a value larger than the +# keep-alive-timeout value. +# +# This option has no effect if Privoxy has been compiled without +# keep-alive support. +# +# Examples: +# +# default-server-timeout 60 +# +#default-server-timeout 60 +# +# 6.7. connection-sharing +# ======================== +# +# Specifies: +# +# Whether or not outgoing connections that have been kept alive +# should be shared between different incoming connections. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# None +# +# Effect if unset: +# +# Connections are not shared. +# +# Notes: +# +# This option has no effect if Privoxy has been compiled without +# keep-alive support, or if it's disabled. +# +# Notes: +# +# Note that reusing connections doesn't necessary cause +# speedups. There are also a few privacy implications you should +# be aware of. +# +# If this option is effective, outgoing connections are shared +# between clients (if there are more than one) and closing the +# browser that initiated the outgoing connection does no longer +# affect the connection between Privoxy and the server unless +# the client's request hasn't been completed yet. +# +# If the outgoing connection is idle, it will not be closed +# until either Privoxy's or the server's timeout is reached. +# While it's open, the server knows that the system running +# Privoxy is still there. +# +# If there are more than one client (maybe even belonging to +# multiple users), they will be able to reuse each others +# connections. This is potentially dangerous in case of +# authentication schemes like NTLM where only the connection is +# authenticated, instead of requiring authentication for each +# request. +# +# If there is only a single client, and if said client can keep +# connections alive on its own, enabling this option has next to +# no effect. If the client doesn't support connection +# keep-alive, enabling this option may make sense as it allows +# Privoxy to keep outgoing connections alive even if the client +# itself doesn't support it. +# +# You should also be aware that enabling this option increases +# the likelihood of getting the "No server or forwarder data" +# error message, especially if you are using a slow connection +# to the Internet. +# +# This option should only be used by experienced users who +# understand the risks and can weight them against the benefits. +# +# Examples: +# +# connection-sharing 1 +# +#connection-sharing 1 +# +# 6.8. socket-timeout +# ==================== +# +# Specifies: +# +# Number of seconds after which a socket times out if no data is +# received. +# +# Type of value: +# +# Time in seconds. +# +# Default value: +# +# None +# +# Effect if unset: +# +# A default value of 300 seconds is used. +# +# Notes: +# +# The default is quite high and you probably want to reduce it. +# If you aren't using an occasionally slow proxy like Tor, +# reducing it to a few seconds should be fine. +# +# Examples: +# +# socket-timeout 300 +# +socket-timeout 300 +# +# 6.9. max-client-connections +# ============================ +# +# Specifies: +# +# Maximum number of client connections that will be served. +# +# Type of value: +# +# Positive number. +# +# Default value: +# +# 128 +# +# Effect if unset: +# +# Connections are served until a resource limit is reached. +# +# Notes: +# +# Privoxy creates one thread (or process) for every incoming +# client connection that isn't rejected based on the access +# control settings. +# +# If the system is powerful enough, Privoxy can theoretically +# deal with several hundred (or thousand) connections at the +# same time, but some operating systems enforce resource limits +# by shutting down offending processes and their default limits +# may be below the ones Privoxy would require under heavy load. +# +# Configuring Privoxy to enforce a connection limit below the +# thread or process limit used by the operating system makes +# sure this doesn't happen. Simply increasing the operating +# system's limit would work too, but if Privoxy isn't the only +# application running on the system, you may actually want to +# limit the resources used by Privoxy. +# +# If Privoxy is only used by a single trusted user, limiting the +# number of client connections is probably unnecessary. If there +# are multiple possibly untrusted users you probably still want +# to additionally use a packet filter to limit the maximal +# number of incoming connections per client. Otherwise a +# malicious user could intentionally create a high number of +# connections to prevent other users from using Privoxy. +# +# Obviously using this option only makes sense if you choose a +# limit below the one enforced by the operating system. +# +# One most POSIX-compliant systems Privoxy can't properly deal +# with more than FD_SETSIZE file descriptors at the same time +# and has to reject connections if the limit is reached. This +# will likely change in a future version, but currently this +# limit can't be increased without recompiling Privoxy with a +# different FD_SETSIZE limit. +# +# Examples: +# +# max-client-connections 256 +# +#max-client-connections 256 +# +# 6.10. handle-as-empty-doc-returns-ok +# ===================================== +# +# Specifies: +# +# The status code Privoxy returns for pages blocked with +# +handle-as-empty-document. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Privoxy returns a status 403(forbidden) for all blocked pages. +# +# Effect if set: +# +# Privoxy returns a status 200(OK) for pages blocked with +# +handle-as-empty-document and a status 403(Forbidden) for all +# other blocked pages. +# +# Notes: +# +# This directive was added as a work-around for Firefox bug +# 492459: "Websites are no longer rendered if SSL requests for +# JavaScripts are blocked by a proxy." +# (https://bugzilla.mozilla.org/show_bug.cgi?id=492459), the bug +# has been fixed for quite some time, but this directive is also +# useful to make it harder for websites to detect whether or not +# resources are being blocked. +# +#handle-as-empty-doc-returns-ok 1 +# +# 6.11. enable-compression +# ========================= +# +# Specifies: +# +# Whether or not buffered content is compressed before delivery. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 0 +# +# Effect if unset: +# +# Privoxy does not compress buffered content. +# +# Effect if set: +# +# Privoxy compresses buffered content before delivering it to +# the client, provided the client supports it. +# +# Notes: +# +# This directive is only supported if Privoxy has been compiled +# with FEATURE_COMPRESSION, which should not to be confused with +# FEATURE_ZLIB. +# +# Compressing buffered content is mainly useful if Privoxy and +# the client are running on different systems. If they are +# running on the same system, enabling compression is likely to +# slow things down. If you didn't measure otherwise, you should +# assume that it does and keep this option disabled. +# +# Privoxy will not compress buffered content below a certain +# length. +# +#enable-compression 1 +# +# 6.12. compression-level +# ======================== +# +# Specifies: +# +# The compression level that is passed to the zlib library when +# compressing buffered content. +# +# Type of value: +# +# Positive number ranging from 0 to 9. +# +# Default value: +# +# 1 +# +# Notes: +# +# Compressing the data more takes usually longer than +# compressing it less or not compressing it at all. Which level +# is best depends on the connection between Privoxy and the +# client. If you can't be bothered to benchmark it for yourself, +# you should stick with the default and keep compression +# disabled. +# +# If compression is disabled, the compression level is +# irrelevant. +# +# Examples: +# +# # Best speed (compared to the other levels) +# compression-level 1 +# +# # Best compression +# compression-level 9 +# +# # No compression. Only useful for testing as the added header +# # slightly increases the amount of data that has to be sent. +# # If your benchmark shows that using this compression level +# # is superior to using no compression at all, the benchmark +# # is likely to be flawed. +# compression-level 0 +# +# +#compression-level 1 +# +# 6.13. client-header-order +# ========================== +# +# Specifies: +# +# The order in which client headers are sorted before forwarding +# them. +# +# Type of value: +# +# Client header names delimited by spaces or tabs +# +# Default value: +# +# None +# +# Notes: +# +# By default Privoxy leaves the client headers in the order they +# were sent by the client. Headers are modified in-place, new +# headers are added at the end of the already existing headers. +# +# The header order can be used to fingerprint client requests +# independently of other headers like the User-Agent. +# +# This directive allows to sort the headers differently to +# better mimic a different User-Agent. Client headers will be +# emitted in the order given, headers whose name isn't +# explicitly specified are added at the end. +# +# Note that sorting headers in an uncommon way will make +# fingerprinting actually easier. Encrypted headers are not +# affected by this directive. +# +#client-header-order Host \ +# Accept \ +# Accept-Language \ +# Accept-Encoding \ +# Proxy-Connection \ +# Referer \ +# Cookie \ +# DNT \ +# If-Modified-Since \ +# Cache-Control \ +# Content-Length \ +# Content-Type +# +# +# 6.14. client-specific-tag +# ========================== +# +# Specifies: +# +# The name of a tag that will always be set for clients that +# requested it through the webinterface. +# +# Type of value: +# +# Tag name followed by a description that will be shown in the +# webinterface +# +# Default value: +# +# None +# +# Notes: +# +# +-----------------------------------------------------+ +# | Warning | +# |-----------------------------------------------------| +# |This is an experimental feature. The syntax is likely| +# |to change in future versions. | +# +-----------------------------------------------------+ +# +# Client-specific tags allow Privoxy admins to create different +# profiles and let the users chose which one they want without +# impacting other users. +# +# One use case is allowing users to circumvent certain blocks +# without having to allow them to circumvent all blocks. This is +# not possible with the enable-remote-toggle feature because it +# would bluntly disable all blocks for all users and also affect +# other actions like filters. It also is set globally which +# renders it useless in most multi-user setups. +# +# After a client-specific tag has been defined with the +# client-specific-tag directive, action sections can be +# activated based on the tag by using a CLIENT-TAG pattern. The +# CLIENT-TAG pattern is evaluated at the same priority as URL +# patterns, as a result the last matching pattern wins. Tags +# that are created based on client or server headers are +# evaluated later on and can overrule CLIENT-TAG and URL +# patterns! +# +# The tag is set for all requests that come from clients that +# requested it to be set. Note that "clients" are differentiated +# by IP address, if the IP address changes the tag has to be +# requested again. +# +# Clients can request tags to be set by using the CGI interface +# http://config.privoxy.org/client-tags. The specific tag +# description is only used on the web page and should be phrased +# in away that the user understand the effect of the tag. +# +# Examples: +# +# # Define a couple of tags, the described effect requires action sections +# # that are enabled based on CLIENT-TAG patterns. +# client-specific-tag circumvent-blocks Overrule blocks but do not affect other actions +# disable-content-filters Disable content-filters but do not affect other actions +# +# +# +# 6.15. client-tag-lifetime +# ========================== +# +# Specifies: +# +# How long a temporarily enabled tag remains enabled. +# +# Type of value: +# +# Time in seconds. +# +# Default value: +# +# 60 +# +# Notes: +# +# +-----------------------------------------------------+ +# | Warning | +# |-----------------------------------------------------| +# |This is an experimental feature. The syntax is likely| +# |to change in future versions. | +# +-----------------------------------------------------+ +# +# In case of some tags users may not want to enable them +# permanently, but only for a short amount of time, for example +# to circumvent a block that is the result of an overly-broad +# URL pattern. +# +# The CGI interface http://config.privoxy.org/client-tags +# therefore provides a "enable this tag temporarily" option. If +# it is used, the tag will be set until the client-tag-lifetime +# is over. +# +# Examples: +# +# # Increase the time to life for temporarily enabled tags to 3 minutes +# client-tag-lifetime 180 +# +# +# +# 6.16. trust-x-forwarded-for +# ============================ +# +# Specifies: +# +# Whether or not Privoxy should use IP addresses specified with +# the X-Forwarded-For header +# +# Type of value: +# +# 0 or one +# +# Default value: +# +# 0 +# +# Notes: +# +# +-----------------------------------------------------+ +# | Warning | +# |-----------------------------------------------------| +# |This is an experimental feature. The syntax is likely| +# |to change in future versions. | +# +-----------------------------------------------------+ +# +# If clients reach Privoxy through another proxy, for example a +# load balancer, Privoxy can't tell the client's IP address from +# the connection. If multiple clients use the same proxy, they +# will share the same client tag settings which is usually not +# desired. +# +# This option lets Privoxy use the X-Forwarded-For header value +# as client IP address. If the proxy sets the header, multiple +# clients using the same proxy do not share the same client tag +# settings. +# +# This option should only be enabled if Privoxy can only be +# reached through a proxy and if the proxy can be trusted to set +# the header correctly. It is recommended that ACL are used to +# make sure only trusted systems can reach Privoxy. +# +# If access to Privoxy isn't limited to trusted systems, this +# option would allow malicious clients to change the client tags +# for other clients or increase Privoxy's memory requirements by +# registering lots of client tag settings for clients that don't +# exist. +# +# Examples: +# +# # Allow systems that can reach Privoxy to provide the client +# # IP address with a X-Forwarded-For header. +# trust-x-forwarded-for 1 +# +# +# +# 7. WINDOWS GUI OPTIONS +# ======================= +# +# Privoxy has a number of options specific to the Windows GUI +# interface: +# +# +# +# If "activity-animation" is set to 1, the Privoxy icon will animate +# when "Privoxy" is active. To turn off, set to 0. +# +#activity-animation 1 +# +# +# +# If "log-messages" is set to 1, Privoxy copies log messages to the +# console window. The log detail depends on the debug directive. +# +#log-messages 1 +# +# +# +# If "log-buffer-size" is set to 1, the size of the log buffer, i.e. +# the amount of memory used for the log messages displayed in the +# console window, will be limited to "log-max-lines" (see below). +# +# Warning: Setting this to 0 will result in the buffer to grow +# infinitely and eat up all your memory! +# +#log-buffer-size 1 +# +# +# +# log-max-lines is the maximum number of lines held in the log +# buffer. See above. +# +#log-max-lines 200 +# +# +# +# If "log-highlight-messages" is set to 1, Privoxy will highlight +# portions of the log messages with a bold-faced font: +# +#log-highlight-messages 1 +# +# +# +# The font used in the console window: +# +#log-font-name Comic Sans MS +# +# +# +# Font size used in the console window: +# +#log-font-size 8 +# +# +# +# "show-on-task-bar" controls whether or not Privoxy will appear as +# a button on the Task bar when minimized: +# +#show-on-task-bar 0 +# +# +# +# If "close-button-minimizes" is set to 1, the Windows close button +# will minimize Privoxy instead of closing the program (close with +# the exit option on the File menu). +# +#close-button-minimizes 1 +# +# +# +# The "hide-console" option is specific to the MS-Win console +# version of Privoxy. If this option is used, Privoxy will +# disconnect from and hide the command console. +# +#hide-console +# +# +# diff --git a/sources.list b/sources.list new file mode 100644 index 0000000..0feb785 --- /dev/null +++ b/sources.list @@ -0,0 +1,8 @@ +deb http://mirrors.163.com/debian/ jessie main non-free contrib +deb http://mirrors.163.com/debian/ jessie-updates main non-free contrib +deb http://mirrors.163.com/debian/ jessie-backports main non-free contrib +deb-src http://mirrors.163.com/debian/ jessie main non-free contrib +deb-src http://mirrors.163.com/debian/ jessie-updates main non-free contrib +deb-src http://mirrors.163.com/debian/ jessie-backports main non-free contrib +deb http://mirrors.163.com/debian-security/ jessie/updates main non-free contrib +deb-src http://mirrors.163.com/debian-security/ jessie/updates main non-free contrib \ No newline at end of file